Ricerca di "*".

Statement on the response sensitivity of components and machines to electrical, i.e. predominantly electromagnetic fields. It is a physical occurrence that may need to be addressed by means of suitabl

Elastomer seal that is designed and installed such that it seals the damping piston as it moves in, and at the same time leaves open a precisely defined gap through which the displaced air escapes (Fi

Contamination of the hydraulic fluid in a hydraulic system prior to the first flushing. It comprises the contamination that is in the hydraulic fluid itself prior to filling the hydraulic system and t

A serial bus line for data transmission within a locally restricted area is referred to as a LAN (or also an "inhouse net"). Local networks are the sole responsibility of the user and are restricted t

If mineral oil that contains air bubbles is compressed very quickly, the bubbles are heated so quickly that even self-ignition of the air-gas mixture can occur. As a consequence a very large increase

Adhesives are increasingly being used for permanent installations of plastic pipes, with one end of the pipe being widened into a sleeve to ensure there is a long enough area to accommodate the adhesi

Control process required in a mobile hydraulic drive system — with a specific (mechanical or electronic) relationship between the accelerator pedal position and the movement velocity — where a particu

Transfer elements

Control system on which the operating position is separate from the fluid technology systems such that the operating elements need to be operated over a greater distance. Operation can be using both h

Switching elements that after contact or contactlessly output position-dependent signals. As a rule they operate electrically. For electrical position switches a differentiation is made between contac