Hakuteksti "can".

pressure-limiting valve type PMV is a pilot-controlled valve in a spring-loaded ball version. The pressure can be set to up to 700 bar. The pressure-limiting valve type PMV is available as a single valve for pipe

Compatible, ready-for-connection, complete solutions can be assembled easily using a wide range of connection blocks and the valve banks that can be combined with them. The compact hydraulic power pack

as a separate hydraulic pump. To set up a dual-stage pump type RZ (, ) the type Z described here can also be combined with a radial piston pump type R ().

of different operating pressures. In comparison to non adjustable valves a bigger pressure range can be covered. In case of screwing in the adjusting screw up to contact the observance of the maximum

prone to oscillations. Shock valves and shuttle valves with or without restrictor check valves can be fitted in the load-holding valves type LHK, , LHDV, , LHT, e.g. to relieve hydraulic brakes with

prone to oscillations. Shock valves and shuttle valves with or without restrictor check valves can be fitted in the load-holding valves type LHK, , LHDV, , LHT, e.g. to relieve hydraulic brakes with

They act as universally usable electrical energy stores. In a parallel circuit, the energy packs can be expanded to form a battery system in order to reach the machine’s desired range.

ing valve type PDV is a pilot-controlled valve in a piston version, where pressures up to 350 bar can be set. It is available as a single valve for pipe connection or as a manifold mounting valve.

pressure switch type DG is available as a mechanical or completely electronic switch. The pressure can be adjusted up to 700 bar. The adjustment is made via a pushbutton, a setting knob, a setting screw

valves, e.g. type PSL and PSV. Shock valves and shuttle valves with or without restrictor check valves can be fitted in the load-holding valves type LHK, , LHDV, , LHT, e.g. to relieve hydraulic brakes with