Hakuteksti "P - R2 - 1 - 1/4 - AT".

Flow control valves type CSJ are screw-in valves. These valves can be screwed into the easily produced threaded holes.

Programmable logic valve controls control and regulate complex mobile or stationary hydraulic systems. Modular system with Basic module, different expansion modules and software for configuration.

A connection block represents the connecting link between the hydraulic power pack and the hydraulic control. The connection blocks described here are suitable for combining with HAWE compact hydrauli

The load-holding valve type LHDV has special damping characteristics. It is used particularly in conjunction with proportional directional spool valves, e.g. type PSL and PSV. Shock valves and shuttl

The connection blocks type AB and AL are suitable for single-circuit pumps. Type AB has a modular design. It comes as standard with a pressure-limiting valve that acts as a safety unit for a connected

In the closed state the check valve type DRH has zero leakage. The type DRH is a twin check valve for double-acting consumers.

The electronic proportional amplifier EV2D is a multi-channel amplifier for controlling or regulating up to six consumers.

Flow control valves type SJ are screw-in valves. They can be integrated into the line system using a housing. For purely pump circuits, the excess oil flow on the inflow side must be discharged via a

The pressure filter type PFM contains a filter element through which the fluid flows from the inside to the outside. It can be replaced without drips or soiling using standard tools. The ratio of size

type. The valve control type ESX has been certified according to ISO 13849 (PLd) and ISO 61508 (SIL2). It can be used in safety applications.