Hakuteksti "P - R2 - 1 - 1/4 - AT".

The pressure-controlled shut-off valve type CDSV is used as a pressure gauge protection valve, for example. The pressure-controlled shut-off valve type CDSV can be screwed in and can be integrated in

Programmable logic valve controls control and regulate complex mobile or stationary hydraulic systems. Modular system with Basic module, different expansion modules and software for configuration.

The compact hydraulic power pack type HICON’s encapsulated design offers protection against temporary immersion in water according to protection class IP 67. The pump module integrates a gear pump and

Proportional pressure-limiting valves are a type of pressure control valve. They remotely control the pressure in hydraulic systems continuously and electrically.

The pressure-limiting valve type PDV is a pilot-controlled valve in a piston version, where pressures up to 350 bar can be set. It is available as a single valve for pipe connection or as a manifold m

The pump element type MPE and PE is the basic component of all HAWE radial piston pumps. The double pump element type DMPE consists of a low pressure and a high pressure piston. When the low pressure

The connection blocks type AN, AL and NA are suitable for dual-circuit pumps. They feature a pressure-limiting valve and one or two shut-off valves. Directional valves are integrated in some cases or

The throttling directional spool valve type DL influences the speed of the consumer by throttling the pump circulation via a parallel circuit (bypass control). The close fit of the spool in the thrott

PLVC programming environment, PC software installation program.

The check valve type RK, RB, RC and RE can be screwed-in, type ER can be plugged-in. Type RE is a plate valve without a spring. Type RE is suitable for isolating pressurising loads or as a foot val