Hakuteksti "can".

valves are a type of flow valve. They generate a constant flow rate independent of the load which can be controlled in an electro-proportional and remote way.

valves are a type of flow valve. They generate a constant flow rate independent of the load which can be controlled in an electro-proportional and remote way.

lly pilot-controlled 2/2-way directional seated valves. They are screw-in valves. All connections can be subjected to the same pressures.

The pressure reducing valve type CDK is a screw-in valve, and can be used in control blocks. The bore-holes required for mounting are easy to create. All versions oil-tight when closed.

leakage. It is available with hydraulic release. Hydraulic release suppresses relief surges that can occur at high pressure and with a large consumer volume.

Single-circuit, dual-circuit or triple-circuit systems can be selected. A radial piston pump, an external gear pump or an internal gear pump can be used as a hydraulic pump. The compact hydraulic power [...] HKF are suitable for use as a highly compact control system, since connection blocks and valve banks can be directly mounted.

The electric amplifier EV2S-BT can connect with an Apple iPhone or Android smartphone via Bluetooth. The HAWE eControl app is available for free from the Apple App Store or Google Play Store.

pressure-limiting valve and one or two shut-off valves. Directional valves are integrated in some cases or can be flange-mounted or connected via pipes. Intermediate blocks merge the flows of the dual-circuit [...] mount connection blocks for single-circuit pumps according to . Valve banks with directional valves can be fitted directly to a connection block type AN, AL or NA. This creates a compact hydraulic control

TLC is a combined design consisting of a directional spool valve and a releasable check valve. It can be used to hold hydraulic actuators in position for long periods of time. The built-in T-throttles [...] are IP65 connectors (AMP superseal) used in the automotive industry. Multiple directional valves can be combined in series in valve bank design type TLC. Combined with the compact hydraulic power pack

Flow control valves type SJ are screw-in valves. They can be integrated into the line system using a housing. For purely pump circuits, the excess oil flow on the inflow side must be discharged via a