Hakuteksti "P - R2 - 1 - 1/4 - AT".

The load-holding valves type LHK and LHT are suitable for applications that are not particularly prone to oscillations. Shock valves and shuttle valves with or without restrictor check valves can be

Programmable logic valve controls family PLVC, for complex mobile and stationary hydraulic systems.

The flow control valve type SE has a directly actuated metering orifice, which is advantageous for control operations when Qmin is almost zero. The flow control valve type SEH has a pilot-controlled m

The compact hydraulic power pack type H consists of the tank, an integrated motor and the gear pump directly attached to the motor shaft. This compact design results in a very small installation packa

Proportional flow control valves are a type of flow valve. They generate a constant flow rate independent of the load which can be controlled in an electro-proportional and remote way.

The high-pressure hose lines type H3 and H4 are made of high-quality materials. They have small outer diameters and small bending radii. Connection version C with nipple is designed for cutting ring fittings

The variable displacement axial piston pump type V60N is designed for open circuits in mobile hydraulics and operates according to the swash plate principle. It is available with the option of a thru-

Battery chargers type SBC and OBC are essential accessories for IEP batteries and components for electric drive systems. SBCs (standalone battery chargers) are external units enabling direct charging

The compact hydraulic power pack type HICON’s encapsulated design offers protection against temporary immersion in water according to protection class IP 67. The pump module integrates a gear pump and

The mechanically adjustable pressure relief valve type D offers the setup of different operating pressures. In comparison to non adjustable valves a bigger pressure range can be covered. In case of