Hakuteksti "can".

pilot actuation ). In addition, the main device and the operating element (generally a pilot valve ) can be separated from each other, making remote controls an option.

PSI (210/420 bar), nominal widths of 15 to 50 and fastening screws with UNC threads. The SAE flange can be used as a two-part flange to connect pipelines to non-split counterfaces or as a one-part flange

Hydraulic motor , which can be integrated directly into the wheels of a vehicle. This produces a direct transfer of the force without interposing a manual transition, cardan shaft and differential gear

string with a Hamming distance of d = 2 offers greater transmission security, since single errors can be detected and corrected. Only double errors will cause something to look like another code word.

digital or binary character. In addition, they may have a continuous value, i.e. the signal parameter can take on all values within an interval; have a discrete value, i.e. the signal parameter, e.g. a DC

al valve ), to reduce the power losses as a consequence of internal leakage the response pressure can be pre-selected on a case-by-case basis (see Pressure-flow (p-Q) control of a pump ).

or sensors, etc. Indirect signal output elements either output the measured value in a form which can only be identified with auxiliary equipment or special knowledge or they relay the measured value directly

Contamination of the hydraulic fluid of a hydraulic system. It can be caused by solid particles and/or dissolved foreign matter, by mixing with foreign liquids, or by air entering the hydraulic fluid.

delivery flow pulsation and are therefore quiet during operation. With axial play compensation they can achieve average pressures of up to around 160 bar, while 300 to 320 bar is possible with combined axial

the drive: Transport motion : with the highest force required on accelerating the load. The velocity can mostly not be maintained accurately. Example: block valve. Power motion : required force over the entire