Hakuteksti "pump".

The mini hydraulic power pack type HR is equipped with an internally pressurized radial piston pump. A reversing function is possible by changing the motor’s direction of rotation. No directional valve

The piston type accumulator type HPS supports or increases the pump delivery flow or stores pressure energy. It is used in clamping hydraulics to compensate for volume changes in the event of temperature

throttling directional spool valve type DL influences the speed of the consumer by throttling the pump circulation via a parallel circuit (bypass control). The close fit of the spool in the throttling

available for usage in potentially explosive atmospheres. By means of additional functions in the pump line, in the intermediate plates (longitudinal and sandwich valve combination) and ancillary blocks

versions are available for use at low pressure settings or with low pressure dependence, e.g. when pump (inlet) pressure is highly variable.

exceeded, the switch unit type CR switches the low-pressure circuit to circulation. The high-pressure pump carries out the pressing action. The switch unit hydraulic release acts automatically. It initiates

holding and lowering are facilitated only be means of switching on, switching off and switching on with pump delivery reversal through a suitable electric drive motor.

power pack type MPN and MPNW consists of the tank, the integrated motor and the radial piston or gear pump directly attached to the motor shaft. Single-circuit or dual-circuit systems can be assembled. Type

The mini hydraulic power pack type A is characterised by its modular design. An external gear pump is flange-mounted onto the equipment rack in the hydraulic power pack. The oil tank is a round, plastic

hydraulic power pack type KA consists of the tank, the integrated motor and the radial piston or gear pump directly attached to the motor shaft. The compact design that this achieves is a crucial advantage