Hakuteksti "pump".

pumps type H and HE are single-acting. They draw in oil in one direction and pump it in the opposite direction. The hand pump type HD is double-acting. It pumps and draws in the same quantity of oil in

protection against temporary immersion in water according to protection class IP 67. The pump module integrates a gear pump and a brushless motor. The motor's rotation can be reversed, thus facilitating flow

The proportional directional spool valve type PSL is suitable for constant pump systems and type PSV is for variable pump systems. The flow rates and load pressures for the individual consumers can be

hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump or gear pump directly attached to the motor shaft. The directly mounted electronic communication box with

solution for simple dividing tasks, e.g. if two hydraulic consumers with varying loads supplied from one pump are to be moved simultaneously without interaction.

type SJ are screw-in valves. They can be integrated into the line system using a housing. For purely pump circuits, the excess oil flow on the inflow side must be discharged via a pressure-limiting valve

When it comes to trimming Z-drives, HAWE offers ready-for-connection systems comprising a pump and cylinders that can be directly connected with hoses. The trim cylinder is optionally supplied with an

valve without a spring. Type RE is suitable for isolating pressurising loads or as a foot valve for a pump suctuion linde.

type NSWP can be flexibly adapted to different control tasks by means of additional functions in the pump line and/or on the consumer side (e.g. restrictors, restrictor check valves). Can be combined with

type NSWP can be flexibly adapted to different control tasks by means of additional functions in the pump line and/or on the consumer side (e.g. restrictors, restrictor check valves). Can be combined with