Hakuteksti "can".

Graphical, cloud-based programming interface for hydraulic controls CAN IO 14, EV2S.

The valve type ED, RD and RDF can be integrated directly in the line.

Software for transferring firmware and parameters to EV2S and CAN I/O 14.

and CSV is a directly controlled valve that is damped as standard. Valve type CMV and CSV can be screwed in and can be integrated into manifolds. The necessary mounting holes are straightforward to make.

The electronic pressure transducers type DT 2 can be used in almost all areas of industrial and mobile hydraulics. The electronic pressure transducers DT 2 are available with different analogue outputs [...] two-wire or three-wire technology. Depending on the requirement, the electronic pressure transducers DT 2 can be used in a housing made of a highly resistant, glass-fibre reinforced plastic or stainless steel

pressure-limiting valves, seated valves etc. An intermediate plate can be inserted between the sub-plate and the directional valve. The valve bank can be directly flange-mounted to type H350, H440 and KA compact

The directional spool valve bank type SWS is available with series connection. The consumers can be operated with on-off or proportional control. Versions are available for usage in potentially explosive [...] (longitudinal and sandwich valve combination) and ancillary blocks the directional spool valve bank can be flexibly adapted to different control tasks.

circuit the valve acts simultaneously as a pressure-limiting valve. The valve type CNE can be screwed-in and can be integrated into control blocks. The necessary mounting holes are straightforward to make

binary valve. The directional spool valve type CWPN can be flexibly combined with the common HAWE valve banks and compact hydraulic power packs. It can also be mounted on customer-specific manifolds or

(on the consumer side) and/or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types [...] assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the standard connection pattern, or for