Hakuteksti "pump".

protection against temporary immersion in water according to protection class IP 67. The pump module integrates a gear pump and a brushless motor. The motor's rotation can be reversed, thus facilitating flow

hand pump type CH is single acting. It draws hydraulic fluid in when the hand lever is moved in one direction and discharges it when the hand lever is moved in the opposite direction. The hand pump type

hydraulic systems that are supplied by dual stage pumps, a combination of high-pressure pump and low-pressure pump. The two-stage valve type NE is used with directional valves to control double-acting

hydraulic systems that are supplied by dual stage pumps, a combination of high-pressure pump and low-pressure pump. The two-stage valve type NE is used with directional valves to control double-acting

press drive consists of two cylinder blocks (SAMB) including suction valves and one pump module (SPLM), consisting of pump, filter, coupling, and motor flange, which enable operation of CNC press brakes.

The R pump is available as a complete R hydraulic power pack, including oil tank, or optionally as a cover plate version for mounting a separate oil tank. Furthermore, a wide range of variants with and [...] and without motor, connection block and valve mounting can be configured. The pump is located in the tank. R hydraulic power packs are used to generate pressure for stationary oil-hydraulic systems.

consumers are always adequately supplied with hydraulic oil. The priority valve type PV divides the pump volumetric flow into two circuits. The one circuit has priority of supply, for example the steering [...] receives the remaining volumetric flow. The valve is suitable for mounting directly on the hydraulic pump.

the tank, an integrated motor and the gear pump directly attached to the motor shaft. This compact design results in a very small installation package. The pump carrier comes with an integrated pressure-limiting

The proportional directional spool valve type PSLF is suitable for constant pump systems and type PSVF is for variable pump systems. They are available as single manifold mounting valves or in a valve

the radial piston pump directly attached to the motor shaft. This design results in a very small installation package and makes it easy to transport the hydraulic power pack. The pump carrier comes with