H, HD, HE - Hand pumps
The hand pumps type H, HE and HD are available for pipe connection and manifold mounting.
The hand pumps type H and HE are single-acting. They draw in oil in one direction and pump it in the opposite
Software - ESX
The mobile controller type ESX is a freely programmable PLC with an integrated proportional amplifier. The programming languages LogiCAD, C++ and CoDeSys are available for application programming purp
NSWP - Directional spool valves
The directional spool valve type NSWP can be flexibly adapted to different control tasks by means of additional functions in the pump line and/or on the consumer side (e.g. restrictors, restrictor che
CAV - Orifices, throttle valves and throttle/shut-off valves
The valve type CAV, as a slotted throttle, is insensitive to micro contamination.
The valve type CAV can be screwed-in and can be integrated into manifolds. The necessary mounting holes are straightf
TQ - Flow dividers
The flow divider, type TQ is, due to its simple design, an economical solution for simple dividing tasks, e.g. if two hydraulic consumers with varying loads supplied from one pump are to be moved simu
RC, RX - Check valves
The check valve type RK, RB, RC and RE can be screwed-in, type ER can be plugged-in.
The spring-loaded plate valve type RC can be screwed-in in any direction and is particularly suitable for fast sw
CWPN - Directional spool valves
The directional spool valve type CWPN is a 4/3- or 4/2-way directional valve with standard connection pattern NG 6 (CETOP 03). It is directly actuated and a binary valve.
The directional spool valve type
WH, WN - Directional seated valves
valves type WN and WH are manifold mounting valves. 2/2 and 3/2-way directional seated valves are available. These are also available combined as 3/3 and 4/3-way directional seated valves. They are ball seated
MV, MVA, MVB, MVCS, MVD, MVF, MVH, MVJ, MVK, MVS, MVT, MVU, MVZ, DMV, DMVN, SV, SVC, SVP - Pressure limiting valves, sequence valve
Sequence valves generate a constant pressure difference between the inlet and outlet flow.
The types MV.., SV.., DMV.. are directly controlled valves that are damped as standard.
HLU - Hydraulic Locking Units
diameter of 32 mm. The latest generation in an integrated design, the LE-X, is available in two versions – mechanical (M) and electronic (E). The electronic version is ideally prepared for Condition Monitoring