Hakuteksti "P - R2 - 1 - 1/4 - AT".

The check valve type RK, RB, RC and RE can be screwed-in, type ER can be plugged-in. The spring-loaded ball check valve type RK, RB and ER is very robust and insensitive to soiling. Type ER can be

Peak USB-Driver to be used with all HAWE software products with CAN interface (VisualTool, PSXCAN Tool, etc.).

In the lifting module type HMT and HST directional seated valves are used that ensure the load is held securely. Two-way flow control valves are used to limit the maximum flow rate. Valve sections of

The hydraulic press drive type MACB consists of two cylinder blocks with integrated suction valves and one pump module (MPLM). The pump module includes pump, filter, coupling, and motor flange. Th

Diaphragm accumulators are a type of hydraulic accumulator. They are used primarily for hydraulic damping, as energy stores and for pressure and flow rate equalisation.

Check valves with hydraulic release are a type of check valve. They block one or both hydraulic consumer lines or are used as a hydraulically actuated drain valve or idle circulation valve.

The pressure-dependent shut-off valve type DSV is used as a safeguard pressure gauge, for example. The valve type DSV is available for pipe connection or manifold mounting.

The Power Distribution Unit PDU is used to connect up to 4 or up to 8 batteries in a parallel circuit and connect them to an electrical drive system. Up to 5 or up to 10 outputs are available for the consumers