Hakuteksti "pumpe".

The axial piston pump type K60N is designed for open circuits in mobile hydraulics and operates on the bent axis principle. The pump is fitted mainly to the power take-off on commercial vehicle transmissions [...] transmissions. The axial piston pump type K61N is designed for open circuits in mobile hydraulics and operates on the bent axis principle. The pump is fitted mainly to the power take-off on commercial vehicle

pumps in series. The sturdy pump is particularly suitable for continuous operation in challenging applications. The range of pump controllers allows the axial piston pump to be used in a wide variety [...] The axial piston pump type V30D is designed for open circuits in industrial hydraulics and operate according to the swash plate principle. They are available with the option of a thru-shaft for operating

thru-shaft for operating with additional hydraulic pumps in series. The range of pump controllers allows the axial piston pump to be used in a variety of applications. [...] The variable displacement axial piston pump type V60N is designed for open circuits in mobile hydraulics and operates according to the swash plate principle. It is available with the option of a thru-shaft

The power packs are equipped with aluminium or steel oil tanks. The pump is located in the tank. One pump or a pump combination is possible. Radial piston pumps or external gear pumps are both used, as

MACB consists of two cylinder blocks with integrated suction valves and one pump module (MPLM). The pump module includes pump, filter, coupling, and motor flange. The proportional directional control

hydraulic pump type LP, the flow rate depends on the set air pressure and the currently effective hydraulic counter-pressure. It can drop away until the pump comes to a standstill. The pump starts up again [...] (maintaining pressure) or the pneumatic pressure increases further. The hydraulic pump type LP is available as a single pump, in the cover plate version or as a hydraulic power pack with different tank sizes

hydraulic pump type LP, the flow rate depends on the set air pressure and the currently effective hydraulic counter-pressure. It can drop away until the pump comes to a standstill. The pump starts up again [...] (maintaining pressure) or the pneumatic pressure increases further. The hydraulic pump type LP is available as a single pump, in the cover plate version or as a hydraulic power pack with different tank sizes

and dual-circuit systems can be assembled. A radial piston pump, an external gear pump or an internal gear pump can be used as a hydraulic pump. The compact hydraulic power pack type HKL is suitable for

hydraulic system with a variable pump and a closed centre load sensing valve (CC-LS valve), the copier valve boosts the LS signal reported to the pump controller of the variable pump and thus compensates for oil [...] oil leakage losses in the LS line or at the pump controller. By boosting the LS signal(LS+), the KADM ensures that a sufficiently high p is provided at the CC-LS valve and there are no speed losses with

protection against temporary immersion in water according to protection class IP 67. The pump module integrates a gear pump and a brushless motor. The motor's rotation can be reversed, thus facilitating flow