Hakuteksti "P - R2 - 1 - 1/4 - AT".

The proportional pressure-limiting valve type PMV is a pilot-controlled valve in a spring-loaded ball version. The pressure can be set to up to 700 bar. The pressure-limiting valve type PMV is availab

The throttle and shut-off valve type AVT produces a throttle effect by means of an annular gap. The valve type AV is available as a screw-in valve or valve for pipe connection.

The directional seated valve type VP is a manifold mounting valve. It is a cone-seated valve. 2/2, 3/2 and 4/2 directional seated valves with different types of actuation are available. All connections can

a control line the higher pressure in the high-pressure circuit holds open the pressure-controlled 2 directional valve type CNE and with it the idle circulation. In the low-pressure circuit the valve acts

The modular kit available for MPUs contains a variety of electric motors with different power outputs, which can be combined with different positive displacement pumps. The wide range on offer allows

NBVP is a manifold mounting valve with standard connection pattern nominal size NG 6. 2/2-, 3/2-, 3/3-, 4/2-, 4/3- and 4/4-way directional seated valves with different types of actuation are available. All

The sequence valve type VR is available as a screw-in valve and in a housing version for in-line installation.

Directional seated valves type SVS, SVN, IVN and IVS are hydraulically pilot-controlled 2/2-way directional seated valves. They are screw-in valves. All connections can be subjected to the same pressures

The proportional directional spool valve type PSLF is suitable for constant pump systems and type PSVF is for variable pump systems. They are available as single manifold mounting valves or in a valve

The drain valve type BR is a valve combination consisting of a 2/2-way directional seated valve and an upstream orifice for restricting the flow rate.