Manual adjustment
Adjustment of the output volume of a pump or the displacement of a motor by hand via a spindle. Once the desired value has been set, the pump/motor continues to work as a fixed displacement unit.
Drive power
Power drawn at the shaft of a hydraulic pump at a specific point in time or under specific load conditions. It differs from the hydraulic power by the sum of the pump losses ( volumetric efficiency, hydr
Pressure limitation
controllers, reduces or limits the pump delivery flow on reaching an upper adjustable pressure to prevent the pressure-limiting valve triggering and the related power loss. Pump controls in hydrostatic propulsion
Pressure pulsations
in a hydraulic pump from the suction phase to the pressure phase and vice-versa. Their number (frequency) depends on the number of displacement units and the rotation speed of the pump.
Nominal power
Power of a device (pump, motor, valve ) within defined parameters.
Current-fed system
hydraulic motor or cylinder speed or stroke rotation speed is bound by the pump delivery flow . Due to this current feed, a pump can only ever actuate one drive unit. It is only possible to drive several
Feed circuit
with fresh oil in a closed circuit. For this purpose, there is a feed circuit from the Charge pump (flushing pump), a Filter and a cooler as well as two for supply and the flush valve for removal.
Set geometric displacement
Displacement volume of a hydrostatic pump or displacement volume of a hydrostatic motor.
Load sensing system
constant pump as well as a variable pump . The highest pressure occurring in the system in the pipes to the actuators p LS is fed back to the inlet pressure compensator or the LS controller for the pump and [...] whereas this element in the circuit with the variable pump is not even made available at this stage as a result of an adjustment to the flow rate for pump Q 1 . The individual pressure compensator may be located [...] total for the flow rates required is greater than the max. delivery flow for the pump. The LS system with variable pump is a closed centre system : if no flow rate is requested by the system (all proportional