Hakuteksti "P - R2 - 1 - 1/4 - AT".

The axial piston motor type M60N is designed for open and closed circuits and operates based on the bent axis principle. The motor is particularly suitable for usage in mobile applications.

type BVG is installed directly in the pipe. The valve type BVP is a manifold mounting valve. 2/2, 3/2, 3/3 and 4/3 directional seated valves with different types of actuation are available. All connections

The load-holding valves type LHK and LHT are suitable for applications that are not particularly prone to oscillations. Shock valves and shuttle valves with or without restrictor check valves can be

The proportional pressure reducing valve type PM and PMZ is a directly actuated valve with a piston and is controlled electro-proportionally. It continuously maintains a constant pressure on the secon

them. The compact hydraulic power pack CPU is suited for nominal operating modes S2 (short period operation) and S2 (intermittent operation). The special feature of the CPU is the housing made of aluminium

Proportional flow control valves are a type of flow valve. They generate a constant flow rate independent of the load which can be controlled in an electro-proportional and remote way.

The R pump is available as a complete R hydraulic power pack, including oil tank, or optionally as a cover plate version for mounting a separate oil tank. Furthermore, a wide range of variants with and [...] without motor, connection block and valve mounting can be configured. The pump is located in the tank. R hydraulic power packs are used to generate pressure for stationary oil-hydraulic systems.

PC software for the parametrisation and diagnostics of different control types (PLVC, CAN I/O14, ESX, etc.), installation program.

The pressure reducing valve type VDM is hydraulically pilot-controlled. These valves feature an override compensation, i.e. acting like a pressure-limiting valve if the secondary pressure exceeds the