Hakuteksti "P - R2 - 1 - 1/4 - AT".

The orifice insert type EB is primarily used in valves for manifold mounting. As such an additional intermediate plate is not necessary. The orifice insert is available in 5 sizes and with various hol

The directional seated valve type BVE is a screw-in valve. 2/2 and 3/2 directional seated valves are available. All connections can be subjected to the same pressures. Appropriate connection blocks enable

The compact hydraulic power pack type KA consists of the tank, the integrated motor and the radial piston or gear pump directly attached to the motor shaft. The compact design that this achieves is a

The ROVO robot platform has a fully electrical drive system and runs on caterpillar tracks. It has been specially developed for off-road use. The chassis is equipped with a powerful drive and a propr

In the lifting module type HMT and HST directional seated valves are used that ensure the load is held securely. Two-way flow control valves are used to limit the maximum flow rate. Valve sections of

The radial piston pump type R consists of valve-controlled pump elements arranged in star form around an eccentric. For large flow rates, up to 42 pump elements can be set up in 6 stars stacked one above [...] elements’ output volume is merged to feed one or more pressure outlets. The radial piston pump type R, RG and RZ has a closed pump housing. Therefore, besides use as a motor pump outside an oil tank, i

The flow control valve type SB and SQ is available as a screw-in valve, a housing version with pipe connection or as a banjo bolt version. Type SB has a slightly inclined characteristic line for oscil

Reducing connectors can be used to combine devices. Additional accessory parts such as screen filters and filter elements safeguard the hydraulic devices against larger, stray impurities which may occ

The electrohydraulic ePRAX® control press system closes the gap between the valve controlled ePRAX® basic and the servo-driven high-end ePRAX® max solutions for press brakes. The electrohydraulic syst

The DG 7 pressure switch device has an IO-Link communication interface. The parameters of the device can only be adjusted using IO-Link via a PC or memory module.