Hakuteksti "P - R2 - 1 - 1/4 - AT".

The type OSCA-D load-holding valve is especially suitable for applications that are either particularly susceptible to vibration or that work with very high load pressures. The valve is designed as a

HAWE Hydraulik’s drives for exoskeletons are fully assembled hydraulic systems consisting of a hydraulic power pack, valve block, cylinder, hose line and sensor system. They were developed by HAWE Mic

The restrictor check valve type BC combines the function of a flow valve with a check valve. The valve is available as a perforated restrictor or as a slotted restrictor. It limits the flow during the

The hydraulic press drive consists of two cylinder blocks (SAMB) including suction valves and one pump module (SPLM), consisting of pump, filter, coupling, and motor flange, which enable operation of

The proportional amplifier type EMMA has been developed for direct mounting onto a solenoid valve as a line connector. It is suitable for controlling proportional single-action and twin solenoids. Th

The connection block type B is suitable for single-circuit pumps. A pressure switch can be mounted directly on the connection block. The type B variant can also be used in combination with differentia

The directional valve bank type BNG connects individual valve sections using sub-plates, thus enabling compact hydraulic manifolds to be assembled flexibly. Intermediate plates enable additional func

Configuration and diagnostics software for INKA multi sensor, installation program.

The lifting columns type CTL and CCL comprise a hydraulic power pack, controller and consumers for all required movements and supplementary functions of medical equipment. Standardised hydraulic compo

The connection block type C is suitable for single-circuit pumps. It is used for connecting downstream pressure and return lines by means of commercially available pipe screw connections. It does not