Hakuteksti "can".

the set value, it will thus act as a pressure-limiting valve. The type CLK is a screw-in model and can thus be easily integrated into custom manifolds. Special versions are available for use at low pressure

Two-way flow control valves are used to limit the maximum flow rate. Valve sections of type SWS can be attached space-savingly to the lifting module to control additional functions. The lifting module

Two-way flow control valves are used to limit the maximum flow rate. Valve sections of type SWS can be attached space-savingly to the lifting module to control additional functions. The lifting module

integrated pressure-limiting valve as standard. By directly mounting valve banks, compact control systems can be set up quickly and easily. Variants with integrated valves for a lift/lower function are also available

relieves the press. In the closed state the switch unit has zero leakage. The switch unit type CR can be attached directly to hydraulic power packs type MPN and RZ.

Important parameters (e.g. input signal, minimum current, maximum current, dither, ramp times, etc.) can be set via a wireless interface using a smartphone or PC.

integrated pressure-limiting valve as standard. By directly mounting valve banks, compact control systems can be set up quickly and easily.

regulates in one flow direction and permits free flow in the other direction. The valve type FG can be integrated into control blocks or into the pipework as a banjo screw version.

type PFM contains a filter element through which the fluid flows from the inside to the outside. It can be replaced without drips or soiling using standard tools. The ratio of size to performance is optimal

regulates in one flow direction and permits free flow in the other direction. The valve type FG can be integrated into control blocks or into the pipework as a banjo screw version.