Hakuteksti "can".

miting valve type NPMVP is a pilot-controlled valve in a spring-loaded ball version. The pressure can be set to up to 700 bar. The proportional pressure-limiting valve type NPMVP is designed as a manifold

operating speed (approaching and retreating stroke) and through pressure the required bending force can be controlled.

upstream directional valve with two downstream hydraulic consumers. If necessary, two or three sections can be combined to form a valve bank and connected in series in order to supply up to four double-acting

lines of HAWE hydraulic power packs and valves in various assembly situations. Reducing connectors can be used to combine devices. Additional accessory parts such as screen filters and filter elements safeguard

fluctuations, to cover any leakage losses or to dampen oscillations. The piston type accumulator type HPS can be installed in different situations with the aid of suitable fastening clips.

HSA and HSE clamping cylinders can transmit very large forces in the smallest installation space. Type HSE is a screw-in cylinder for installation in a fixture or base body, type HSA is mounted on a sub-plate

Furthermore, a wide range of variants with and without motor, connection block and valve mounting can be configured. The pump is located in the tank. R hydraulic power packs are used to generate pressure

valve type PMVE is a combination of a seated valve and spool valve with direct actuation. The pressure can be set to up to 420 bar. The PMVE is available either as a screw-in valve or a single valve for pipe

and 4/2 directional seated valves with different types of actuation are available. All connections can be subjected to the same pressures. The directional seated valve is suitable above all for highly

downstream diverter valves distribute it to the individual consumers. Up to three dual-acting consumers can thus be supplied with one valve section.