Hakuteksti "pump".

The pump element type MPE and PE is the basic component of all HAWE radial piston pumps. The double pump element type DMPE consists of a low pressure and a high pressure piston. When the low pressure [...] pressure limit is reached, an integrated valve switches the low pressure piston pressureless. With pump elements and suitable drive components, multi-stage pumps can be designed that can be adapted to different

other. The pump elements’ output volume is merged to feed one or more pressure outlets. The radial piston pump type R, RG and RZ has a closed pump housing. Therefore, besides use as a motor pump outside [...] The radial piston pump type R consists of valve-controlled pump elements arranged in star form around an eccentric. For large flow rates, up to 42 pump elements can be set up in 6 stars stacked one above [...] tank, installation in the container of a hydraulic power pack is also possible. The radial piston pump is available with several pressure outlets which enable the same or several different volumetric flows

the other. The pump elements’ output volume is merged to feed one or more pressure outlets. The radial piston pump type RZ has a closed pump housing. Therefore, besides use as a motor pump outside an oil [...] possible. The pump is available with several pressure outlets which enable the same or several different flows. Type RZ is a classic dual-stage pump consisting of a radial piston pump and a gear pump. [...] The radial piston pump type R consists of valve-controlled pump elements arranged in star form around an eccentric. For large flow rates, up to 42 pump elements can be set up in 6 stars stacked one above

The external gear pump type Z is a constant pump with a closed pump housing. It is available as a separate hydraulic pump. To set up a dual-stage pump type RZ (, ) the type Z described here can also be [...] be combined with a radial piston pump type R ().

hydraulic pump type LP, the flow rate depends on the set air pressure and the currently effective hydraulic counter-pressure. It can drop away until the pump comes to a standstill. The pump starts up again [...] (maintaining pressure) or the pneumatic pressure increases further. The hydraulic pump type LP is available as a single pump, in the cover plate version or as a hydraulic power pack with different tank sizes

hydraulic pump type LP, the flow rate depends on the set air pressure and the currently effective hydraulic counter-pressure. It can drop away until the pump comes to a standstill. The pump starts up again [...] (maintaining pressure) or the pneumatic pressure increases further. The hydraulic pump type LP is available as a single pump, in the cover plate version or as a hydraulic power pack with different tank sizes

The external gear pump type GHP is a constant pump with a closed pump housing. It is available as a separate hydraulic pump.

or triple-circuit systems can be selected. A radial piston pump, an external gear pump or an internal gear pump can be used as a hydraulic pump. The compact hydraulic power packs type HK and HKF are suitable [...] the housing. In the case of type HKF, the fan is powered by a separate motor independently of the pump motor. In the case of type HK, the fan is securely attached to the motor shaft. An external cooler

consists of two cylinder blocks including suction valves and either one pump block SAPB or one pump module SPLM consisting of pump, filter, coupling, and motor flange. The valves for control and lifting [...] al pressure setting and the control of the suction valves are realized via the centrally arranged pump block or module.

consists of two cylinder blocks including suction valves and either one pump block SAPB or one pump module SPLM consisting of pump, filter, coupling, and motor flange. The valves for control and lifting [...] al pressure setting and the control of the suction valves are realized via the centrally arranged pump block or module.