Hydrostatic transmission with separated primary/secondary
Also termed open transmission. hydrostatic transmission on which the pump and motor operate separated from each other. Pipes and hose lines make the hydraulic connection (Figure F 10) . Opposite: inte
Digital cylinders (with several positions)
Cylinder design that is equipped with several, mostly binary tiered pistons that can be operated in any combination. Therefore with n pistons 2n-1 positions are obtained with a positioning accuracy that is [...] elements (Figure D 31) . Although digital cylinders are very complex, they permit exact positioning with defined steps without control and measuring technology.
Carrier sense multiple access with collision detection (CSMA/CD)
Monitoring process for buses with access without a defined sequence. Access collisions are detected. fieldbus
Pump with banked pistons/in-line piston pump
as 3-piston pumps for pressurised water operation . Pumps with banked pistons/in-line piston pump with multiple pistons are now worthless. [...] Hydraulic pump with pistons arranged alongside one another and perpendicular to the drive shaft Piston ( Figure R 24 ). They are preferably made as single-piston pumps (also for manual operation) or as
Indexing accuracy with flow dividers
In a predetermined valve this is a factor of the size of the flow: the smaller it is, the greater the deviation from the desired value. ( Figure T 6 ). Flow dividers based on displacement units (e.g.
Valve with flat slider
The control element is a flat plate that moves in the housing. Valves with flat slider are primarily used as directional valves.
Flow sensor with oval rotor assembly
counter !) based on two oval rotors with special teeth which cause the fluid flow to rotate ( Figure O 12 ). The flow sensor with oval rotor assembly operates with great precision. It is used on test benches
Characteristic with averaged hysteresis
averages in the (static) characteristic curve for a device where hysteresis is averaged out, i.e. with hysteresis at zero ( Figure M 27 ) (DIN 24 311).