Minihydraulik

Minihydraulikaggregate

Die Miniaggregate im besonders kompakten und gewichtsoptimierten Design sind für vielfältige Anwendungen entwickelt. Sie stellen einen Volumenstrom von 0,24 l/min bis maximal 1 l/min zu Verfügung. Das Portfolio umfasst Aggregate für einfache Haltefunktionen im Reversierbetrieb, einfache Hub-Senk-Funktionen bis hin zu speziellen Aggregate für Sicherheitsbremsen von Kränen, Aufzügen und Seilwinden.

Minihydraulikaggregat Typ HR050

In diesem Miniaggregat ist unsere vielfach bewährte Radialkolbenpumpe aus der Automobiltechnik direkt im Pumpenträger integriert. Als Ölbehälter besitzt das Aggregat einen runden durchsichtigen Tank mit einer M8x1 Einfüllschraube.

Technische Daten

• Betriebsdruck: max. 200 bar
• Volumenstrom: max. 1 l/min

Datenblatt: D 6014

Mini hydraulic power pack type HR080

The type HR080 micro hydraulic power pack features high pressure in the smallest space, with the option to use any installation position. The reversing function is performed by reversing the direction of rotation of the motor. A directional valve is not needed. The motor is protected from overload by an integrated temperature switch. This hydraulic power pack is equipped with a DC or AC motor.

Technical data

• Operating pressure: max 210 bar
• Flow rate: max. 0.52 l/min
• Tank volume: 0.3 L
• Weight: 4 kg

Data sheet: D 6342

Mini hydraulic power pack type HR120

The type HR120 mini hydraulic power pack features high pressure in the smallest space, with the option to use any installation position. The reversing function is activated by reversing the motor’s direction of rotation. No directional valve is required. The motor is protected from overloads by a built-in temperature switch.

Technical data

• Max. operating pressure: 210 bar
• Max. flow rate: 0.52 lpm
• Tank volume: 0.7 L
• Weight: 5.5 kg

Data sheet: D 6343

Mini hydraulic power pack type A

The mini hydraulic power unit type A is characterized by its modular design. In the power pack, an external gear pump is flanged to the equipment carrier and the oil reservoir is designed as a round plastic tank with an M 14x1.5 filler plug. The power unit is mainly used in automotive engineering, aviation, floor-lock systems as well as in decentralized hydraulic control systems.

Technical data

• Max. operating pressure: 210 bar
• Max. flow rate: 3 lpm
• Use volume: 0.2 - 0,8 l

Data sheet: D 6025

Mini hydraulic power pack type HICON

The compact hydraulic power pack type HICON’s encapsulated design offers protection against temporary immersion in water according to protection class IP 67. The pump module integrates a gear pump and a brushless motor. The motor's rotation can be reversed, thus facilitating low reversion without requiring a directional valve. When designing the compact hydraulic power pack type HICON, particularly emphasis was placed upon status monitoring. The integrated temperature switch protects the motor from overloading.

Technical data

• Max. operating pressure: 170 bar
• Geometric displacement volume: 0.5 cm3/rev
• Use volume: 0.6 l

Data sheet: D 8543

Valve bank (directional seated valve) type SLC1

The SLC1 chained valves are a combined design consisting of seated valves and dual check valves. They can be used to hold hydraulic actuators in position for long periods of time. Restrictor check valves are mounted on the cylinders for speed adjustment.

Technical data

• Flow rate: max. 1 lpm
• Operating pressure: max. 150 bar

Data sheet: D 6033

Valve bank (directional spool valve) type TLC3

The TLC3 series connection add-on valve is a combined design consisting of a slide valve and a dual check valve. It can be used to hold hydraulic actuators in position for long periods of time. The built-in T-throttles also allow the user to pre-set the speed of the actuators.

Technical data

• Flow rate: max. 3 lpm
• Operating pressure: max. 250 bar

Data sheet: D6020-TLC3

Diaphragm accumulator type AC

The diaphragm accumulator type AC is used as a source of pressurized oil. It supports or increases the pump delivery flow or stores pressure energy, e.g. for an accumulator charge circuit. The type AC is available as a miniature hydraulic accumulator. It is particularly suitable for usage in clamping hydraulics. It is used there to compensate for volume changes in the event of temperature fluctuations, to cover any leakage losses or to dampen oscillations.

Technical data

• Nominal volume: 3.5 dm³
• Operating pressure: max. 350 bar

Data sheet: D 7969