Hydraulic motor
the rotation speed n 2 is only dependent on the flow rate Q 1 introduced and the displacement V 2: while the torque M 2 is determined by the load pressure p L and the displacement V 2: In general, all pumps
SB
배관연결 315 315 2.5 2.5 다운로드 구성자 2 카트리지형, 배관연결, 밴조볼트, 배관형 315 315 67 67 다운로드 구성자 2/1 카트리지형, 배관연결 315 315 16 16 다운로드 구성자 3 카트리지형, 배관연결, 밴조볼트, 배관형 315 315 150 150 다운로드 구성자 3/2 카트리지형, 배관연결 315 315 37 37 다운로드 [...] 밴조볼트, 배관형 315 315 25 25 다운로드 구성자 2 카트리지형, 배관연결, 밴조볼트, 배관형 315 315 50 50 다운로드 구성자 2/1 카트리지형, 배관연결 315 315 16 16 다운로드 구성자 3 카트리지형, 배관연결, 밴조볼트, 배관형 315 315 120 120 다운로드 구성자 3/2 카트리지형, 배관연결 315 315 37 37 다운로드 [...] 315 작동압력 315 유량 (lpm) 2.5 유량 (lpm) 2.5 문서 다운로드 구성자 구성자 사이즈 2 카트리지형, 배관연결, 밴조볼트, 배관형 작동압력 315 작동압력 315 유량 (lpm) 67 유량 (lpm) 67 문서 다운로드 구성자 구성자 사이즈 2/1 카트리지형, 배관연결 작동압력 315 작동압력 315 유량 (lpm) 16 유량 (lpm) 16
Seated valve
used. Directional seated valves are used in hydraulics as: Check valve Pressure-limiting valve 2/2, 3/2, 4/2 and 4/3 directional valves . These can also be combined in an extremely compact fashion as a valve [...] sealing element. They are used in oil hydraulic systems as: check valves , pressure-limiting valves or 2-way plug-in valves. Ball-seated valves ( b ) use a non-guided ball as a seating element. A typical [...] valves, have a disc-shaped sealing element, which can easily be created in duplicate, resulting in a 3/2 directional valve. They are sealed at normal pipe pressure as the sealing disc is pressed onto the valve
Kinematical viscosity v
(°E), and then in stokes or centistokes (cSt), but is now given in m 2 /s or mm 2 /s. cSt can be converted as follows: 1 cSt = 1 mm 2 /s
Pump idle circulation valve
to a pressure-free circulation as soon as its flow rate is no longer needed in the circuit. Special 2/2 directional valves or pressure valves are suitable for use as a shut-off valve.
Individual pressure compensator
Fluidlexikon Individual pressure compensator 2-way pressure compensator which ensures for load sensing systems based on several different loads connected in parallel that the load sensing pressure difference [...] difference remains constant at the metering orifice regardless of the system pressure (2-way flow control valve ).
Opening/closing pressure difference
the closing pressure for a pressure valve is always lower than the opening pressure ( Figure O 2 ). Figure O 2: Opening/closing pressure difference for pressure valves
Water hydraulics
As a consequence, e.g., a 4-way directional valve must be divided into either four 2/2 directional valves or into two 3/2 directional valves. In addition, in this situation compared to mineral oil cavitation
Control surface ratio
control surface ratio plays a particularly vital role in the case of 2-way plug-in valves ( Figure S 85 ). Figure S 85: Surface ratios of 2-way plug-in valves in accordance with DIN 24 342.
Pressure gauge selection switch
pressure gauge may be installed in either the selection switch directly or in the system ( Figure M 2 ). Figure M 2: Pressure gauge selection switch with a pressure gauge installed