Frontend - Productfinder: v1.1.12
Frontend - Configurator: v2.0.0
Frontend - Configurations: v2.0.1
API - Productfinder: v1.2.0
API - Interfaces: v1.0.15
API - Main: v1.0.15
API - Configurations: v1.1.8
Configurator: v1.35.1
유압 파워팩은 유압 소비 장치를 구동하기 위해 유압을 생성하고 준비하는 에너지 유닛입니다. 컴팩트 파워팩, 표준 파워팩, 서보 유압 파워팩 및 미니 유압 파워팩 중에서 선택할 수 있습니다. 알맞은 연결 블록을 사용하면 밸브 어셈블리를 직접 장착할 수 있으며, 이 어셈블리에 웨이시트 밸브 또는 방향전환 스풀 밸브를 결합할 수 있습니다.
파워팩
유압 펌프는 액체를 공급하고 이에 압력을 가하여 기계 에너지를 유압 에너지로 전환합니다. HAWE Hydraulik은 레이디얼 피스톤 펌프, 축방향 피스톤 펌프, 기어 펌프, 유압식으로 작동하는 유압 펌프, 핸드 펌프 및 펌프 요소를 제공합니다. 이러한 제품은 개별적으로 사용하거나 유압 파워팩에 설치할 수 있습니다.
펌프
유압밸브는 유량과 유압 시스템 내 작동유 압력을 제어, 조절 또는 차단합니다. 다양한 유형과 사이즈의 방향 제어 밸브, 압력 제어 밸브, 유량 제어 밸브 및 차단 밸브를 선택할 수 있습니다. 이러한 밸브는 개별적으로 설치하거나 밸브 어셈블리로 조합할 수 있습니다.
밸브
제어 블록은 여러 개의 유압밸브를 컴팩트한 유닛으로 결합하여 기계의 움직임과 기능을 정확하게 제어합니다. HAWE Hydraulik은 서로 다른 밸브 유형이 조합된 두 가지 밸브 어셈블리가 제공합니다. 하나는 모듈식 세그먼트로 설계된 방향전환 스풀 밸브이며, 다른 하나는 특정 용도로 사용되는 리프팅 모듈입니다.
Manifolds, valve banks
통합 솔루션은 기계 구성 요소와 전자 구성 요소를 적합한 소프트웨어 기반 제어 시스템과 결합하여 하나의 제품으로 만든 것입니다. 이를 통해 개별 기능을 컴팩트하게 최적으로 상호 조율할 수 있습니다. 솔루션은 고객별로 맞춤 제작되고 즉시 설치 가능한 형태로 제공됩니다.
통합 솔루션
유압 시스템의 전자 구성 요소는 신호를 감지하고 처리하며 제어하여 유압 기능을 정밀하게 모니터링하고, 조절하고 자동화합니다. HAWE의 전자 구성 요소는 유압 컴포넌트에 최적화되어 있습니다. 이러한 구성 요소에는 모바일 제어 장치, 비례 증폭기 및 센서가 포함됩니다.
전자
배터리 팩 또는 충전 배터리 패키지는 병렬 또는 직렬로 서로 연결된 여러 배터리 모듈로 구성되어 있습니다. 이 장치는 범용 사용이 가능한 전기 에너지 저장 장치로 사용됩니다. 배터리 팩은 배터리 시스템에 병렬 연결하여 확장하여 기계가 원하는 범위에서 작동하도록 할 수 있습니다.
Battery and Battery Management
제품군 중에는 유압밸브와 펌프에 알맞은 유압 액추에이터(예: 클램핑 실린더, 유압 실린더 및 차동 실린더)도 있습니다. 제공되는 유압 모터는 배수량이 일정한 축방향 피스톤 모터입니다.
실린더
부속품으로는 다양한 유형, 나사 연결 및 필터의 유압 어큐뮬레이터가 있습니다. 이러한 제품은 개별적으로 주문하거나 HAWE의 유압 컴포넌트 및 시스템에 설치된 상태로 구매할 수 있습니다.
부속기기
소프트웨어 분야에서 HAWE Hydraulik은 구성 파일, 유압 제어장치의 매개변수화 및 진단을 위한 소프트웨어, 전자 제품을 위한 지원 파일 및 문서 등을 고객에게 제공합니다.
HAWE Software
Programmable logic valve controls control and regulate complex mobile or stationary hydraulic systems.
Controller
Valves with integrated electronics are characterised by outstanding reliability, low hysteresis, reproducibility and high IP protection. With preset parameter sets, you are sure to get a valve that is perfectly matched to your application.
Valves with on-board electronics
Proportional amplifiers actuate proportional solenoid valves by converting an input signal into a corresponding control current.
Amplifiers for proportional solenoids
Electronic pressure transducers operate according to the principle of strain gauges connected in a full bridge.
The sensor elements are manufactured using thin-film technology and are temperature-compensated. The measuring signal is amplified and converted by analogue electronics.
Thanks to the high level of long-term stability and the EMC properties, they guarantee reliable signal detection under adverse ambient conditions.
Pressure switch
HAWE Mattro specialises in the electrification of mobile machinery. Here you will find the support files and documents for battery systems and robot platforms.
Battery and Components
Mobile robot platforms consist of a driverless transport system and installed function modules. This enables them to adapt flexibly on a changing succession of tasks and places of work. Thanks to modern hardware and software components, these platforms can be controlled remotely or by internal programming when performing their work.
Vehicles Mattro
Compact hydraulic power packs are a type of hydraulic power pack. They are characterised by a highly compact design, since the motor shaft of the electric motor also acts as the pump shaft. Compact hydraulic power packs are used to supply hydraulic oil in hydraulic systems.
Compact hydraulic power packs
PC software for the parametrisation and diagnostics.
Service Software
PC software for programming and developing applications for HAWE electronics.
Development Environment
For connecting PC to HAWE electronics.
Accessories