Objet de la recherche «*».

Systems that are intended to prevent pressure equalisation between two chambers at different pressures and that are connected together by gaps. For this purpose non-contact seals ( gap seals ) or - mo

Types of mounting of cylinders

Compressed air filters that can retain particles of dirt down to 0.01 μm. This includes fluid particles of this size (e.g. aerosols), and also bacteria and viruses.

Time that is required for timer elements to recover for renewed correct function.

HLPD oils

Collective term for all measuring procedures that convert mechanical (physical) measured variables into proportional electrical signals. These are therefore always indirect measuring procedures. The c

Provides information on the ratio of the maximum rotation speed of a hydraulic motor (hydrostatic transmission) to the minimum rotation speed: Here for n the still just "even" speed applies.

Combined piston

Above all on pressure valves the closing element (cone or piston) has a damping piston to prevent undesirable oscillations (chattering) (Figure D 3) . It must be designed such that the damping is only

Defect caused by the operation of the system, such as the loosening of components, failure of safety devices, maintenance defects, consequential damage as a result of wear, corrosion, ageing etc. as w