Objet de la recherche «with».

In the case of : signal converter with auxiliary energy used to amplify the power (DIN 19 226).

Piston with piston rod on both sides, mostly of the same size. The term synchronizing cylinder is used.

Flow that is produced in the gap between two chambers with different pressures p 1 and p 2.

Connection together of digital modules with simple or complex functions ( integrated circuits ) to form complete controls.

possible for networks with a star topology or a fully intermeshed structure. With this scenario, two stations are always connected using a transmission medium of their own. With shared use, all devices [...] More than one local network may be connected with each other in the same private area. A gateway to the public network can be arranged to allow communication with remote local networks too. A LAN is used for [...] rights for the possessor of the token. With stochastic bus access, each bus node wishing to send something begins its transmission when things seem to be right with the bus. This may result in data collisions

Transport motion with high speed to cover the free travel from the end position to the start of operation.

. Cutting ring systems in accordance with DIN 2353, various forms of cutting rings are standardised in DIN 3861.

Flow resistor () with laminar flow, e.g. capillary gap. Has a largely linear flow rate pressure characteristic .

Time that is required for a sudden change in the operation pressure with a pre-defined deviation to settle.

together with the elastic sealing rings and the frictional connection between the fitting and the pipe. Flare tube fittings with a metallic seal, connectors with a UNF thread, in accordance with SAE 7514/ISO [...] include a threaded pin to screw in to device bore on one end, with the pipe pushed into the other end. Screw-in thread in accordance with DIN 3852. Fittings: These include connection elements on both sides [...] performs the holding function according to the cutting ring principle in connection with the union nut. Fitting with clamping ring (c) : The connection is made by a fine-ribbed clamping ring, which only