Objet de la recherche «*».

Signal range in which the signal input , signal linking and signal output use hydraulic components. Hydraulic signal technology is very expensive and only suitable for a few linking applications given

Short-term exceeding of a predetermined setpoint.

Conical functional element fixed in the housing in radial piston machines with the task of feeding in suction oil and feeding out the pressure oil and simultaneously reversing the rotating piston cham

Hydraulic fluid line for control tasks.

Collective term for hydraulic systems, which are installed and operated in a fixed location. Opposite: Mobile hydraulics , vehicle hydraulics.

Ratio of the value of an overlaid interfering signal to the value of the useful signal.

Standard measure for the hardness of elastomers , in which the penetration depth is measured in a test specimen. A distinction is made between Shore A for softer specimens (up to approx. 90 Shore A) a

Slowly approaching a position. This is used in feed mechanisms with a high rapid traverse speed directly before the position is reached in order to achieve optimal position accuracy ( Figure S 28 ).

The acoustic power emitted by an oscillating element (acoustic radiator) as sound in air. It cannot be measured directly. Instead, it is calculated using the sound pressure or noise intensity and the

In hydraulics, four-hole flanges with the connection pattern standardised in SAE j 518 ( Figure S 1 ) are the most commonly used flange connections . The American SAE norm specifies two pressure stage