Objet de la recherche «*».

Combination of several individual seals with a pressure ring and a support ring to improve the sealing action. Sealing sets are predominantly used in this form as rod seals. For piston seals in genera

Hose that is designed such that - unlike a normal hose - it expands a relatively large amount under pressure (Figure D 8) . In this way it is particularly suitable for removing pressure peaks and pres

Process in information is converted into a code to make it machine-readable so it can be processed.

Each of the characters from a character set of two characters. Any character can be used as a binary character, e.g. O and L, Yes and No etc. (EDIN 44 300 Part 2).

The term has two elements: 1. Sum of all measures that are necessary to ensure the safety of the operator as well as the machine against overload. Here the requirements from the responsible authoritie

Measure for the effectiveness of a filter. The value is a ratio that is defined by the number of particles before and after passing through the filter with a specific pressure drop (Figure B 13) : The

Gas (air) volume above the maximum fluid level in a vessel that is intended to absorb the expansion in the volume as the temperature of the fluid changes (CETOP RP 100).

Control of a vehicle with hydrostatic drive by operating the pump as a function of the accelerator pedal for the combustion engine and therefore its rotation speed. Pulling away is therefore gentle an

Line connecting the signal averages in the (static) characteristic curve for a device where hysteresis is averaged out, i.e. with hysteresis at zero ( Figure M 27 ) (DIN 24 311).

Pipe inductance is a measure of the pressure difference required, assuming the flow is free of friction, to change the flow rate inside a pipe. It is based on the mass inertia associated with the flui