Objet de la recherche «*».

Pneumatic time element, which has the same construction as an RC element, i.e. a combination of a throttle valve and a small air container. After the container is filled, a valve is reversed ( Figure

Pressure-reducing valve

The various methods of noise measurement. are available to determine the sound power. The calculation of the sound power may be performed by measuring the sound pressure in a soundproof room or in a f

The effective force F 2eff at the piston shaft for a cylinder . This is derived from the piston area A and the pressure p, having subtracted the friction forces F 2R associated with the seals and guid

Is present if there are elements that allocate two value ranges of an input signal in a steady state to two different values of the output signal (two-point elements) (DIN 19 226).

Measurement technology : Device that converts a continuous measurement signal into a pulsating alternating current. Hydraulic systems : In the same vein, the chopper is used for hydraulic devices, cre

Periodic fluctuation of a value above or below or around the work value.

Check valve with two inlets and one outlet. The pressurised inlet is automatically connected to a shared outlet, while the other inlet is blocked ( Figure W 4 ).

The standard process to measure the number of particles is currently automatic particle counting on an opto-electronic basis (e.g. HIAC), but this does not specify the size of the particles. In contra

Term used for hydraulic oils with anti-ageing and corrosion-protection properties for systems subjected to a high thermal load. Viscosity index 95 to 105. (requirement standard DIN 51 524, Part 1).