Objet de la recherche «*».

Special form of annular gear motor whereby the outer ring with its seven teeth remains still, while the inner wheel with its six teeth performs a planetary-type movement. As a result, a volume associa

Hydrostatic transmission involving a pump combined with a motor in a block design. In general, stationary forms of hydrostatic transmission are designed as an integral hydrostatic transmission whereby

Volume displaced by a stroke or other cycle on all displacement elements on a displacement unit (pump/motor) during one revolution of the drive shaft. The output volume is generally stated in cm 3 . G

Collective term for hydraulic cylinders and hydraulic motors . Given the low losses associated with the drive, both have very low levels of damping (D H = 0.05 to 0.2).

Workflow control whose switching conditions depend only on time. For example, timer elements, time counters, gear shift drums with a constant rotation speed can be used to produce the switching condit

Covers the activities associated with devising, coding and testing a computer program (EDIN 19 226, Part 5). In a narrower sense therefore, the word describes the creation of a detailed algorithm in a

Here, the associated force is fed back to acknowledge that a state has been achieved. Force feedback generally uses mechanical means with the help of springs. Example: mechanical feedback from servo v

If, on drives with several loads, the function depends on reaching a specific boundary condition for the upstream load, the term sequence control is used. The sequence control of actuators can be cont

The usable volume ΔV of a hydraulic accumulator results from the nominal volume V0 of the accumulator, the precharge pressure p0 and the upper accumulator pressure p2 and lower accumulator pressure p1

Throttle with a constant cross section. Opposite: variable throttle .