Objet de la recherche «*».

Basic design for a hydraulic drive in which the fluid circulates from the pump to the actuator and from there straight back into the suction line of the pump. The main difference between this and an "

Pressure at which a filter element becomes so crushed (destroyed) that it ceases to function. According to ISO 2941, however, the collapse pressure is simply the pressure at which the filter element i

Effective element of a limited angle rotary actuator with mostly a rectangular cross-section that is fastened to the shaft and to which a flow of hydraulic fluid is applied.

Time at which the correcting variable runs through the correcting range at the maximum considered correcting speed (DIN 19 226).

Hydraulic motor , which can be integrated directly into the wheels of a vehicle. This produces a direct transfer of the force without interposing a manual transition, cardan shaft and differential gea

Power limiting

The law of superposition states: If an input variable (xe1) brings about an output variable (xa1) and also another input variable (xe2) brings about an output variable (xa2), therefore: if the law of

Area between the minimum and the maximum permitted temperature (e.g. of the medium, environment, etc.)

Signal supplied to the accumulating functional elements of a synchronous control via their clock. At signal value "L": Clock pulse and at signal value "0": Clock pause (DIN 19 237).

Geometric volume required for the actuation element of a device to function.