Meet your partner with the perfectly tailored solutions

The V80M provides highest efficiency with which you can achieve the same speed when lifting, pivoting and steering despite a small diesel engine. Through optimized product design this pump requires less installation space than other pumps in its class.

Because not all applications require maximum flexibility, HAWE Hydraulik offers cost-efficient standard components with the C-Line.

With up to 1000 l / min the PSLF-CAN is the largest valve of this series and offers the known advantages during start-up and operation as its smaller sizes.

HAWE eDesign is a cloud-based graphical programming interface that enables the user to design programs and to install it directly on the electronic control without knowing a programming language.

The PSL product family has proven itself in many types of machines as a robust and at the same time sensitive control system. The OnBoard electronics with CAN-Bus interface control have been successfully used worldwide for over 10 years and is ideal for a wide range of applications.

Together with Mattro’s engineers HAWE Hydraulik offers consulting expertise for the entry into electric mobility. Starting with the selection of the ideal drive concept, the coordinated design of the traction and working hydraulics, up to the dimensioning of the battery pack and the construction of a test vehicle, you will receive everything from a single source.

The load-holding valve type CLHV is suitable for applications with low and medium tendencies to oscillate and is used especially in connection with proportional directional spool valves, e.g. types PSL and PSV.

The axial piston pump type V60N is designed for open circuits in mobile hydraulics and operate according to the swash plate principle. The large selection of different pump controllers allows the type V60N axial piston pump to be used in a variety of applications.

Under a bridge, above a roof or next to a wind power plant – wherever you need to work, hydraulics can get you there. Dealing with great heights accurately and safely not only requires being able to overcome vertigo. You also need to be able to rely on technology.

When a bulky load needs to be unloaded on the 3rd floor of a building or an expensive classic car needs to be recovered, the full concentration of the crane operator is required. Wouldn‘t it be useful then if electronics, hydraulics and mechanics could work together easily and safely? If the operator is satisfied, then the crane manufacturers and the suppliers have done a good job.

A good crane should be powerful, mobile, operator-friendly and, of course, completely safe. On top of that, it should lift, load, turn and move around with minimal energy consumption. HAWE Hydraulik offers reliable, efficient, state-of-the-art hydraulic solutions that enable you to meet all these requirements.

Whether it’s small blast holes, major tunnels or long conduits, in any drilling or boring operation, the direction and pressure have to be exactly right. If the drilling rig encounters unexpected soil conditions, all the hydraulic and electronic components have to work together seamlessly to ensure successful results.

HAWE Hydraulik is the perfect partner for mobile machines in agriculture, forestry and construction industry. We offer fully integrated solutions at every stage from designs and manufacture through to the start of operations.