Mini-hydraulics

Mini power packs

With their highly compact, weight-optimised design, mini power packs are designed for a wide range of applications. They provide a flow rate from 0,24 lpm to a maximum of 4 lpm. The portfolio includes hydraulic power packs from simple holding functions in reversing mode, simple lifting/lowering functions to special power packs for safety brakes for cranes, lifts and winches.

Typ4_S_1.rgb.100x100

Mini power pack type HR050

Mini power pack type HR050

In this mini power pack, our well-proven radial piston pump from automotive engineering is integrated directly into the bellhousing. The unit has a round transparent tank with an M8x1 filler plug as oil reservoir.

Technical data

  • Operating pressure: max 200 bar
  • Flow rate: 1 l/min

Data sheet: DH 6014

HR080_S_1_DH6342.rgb.100x100

Mini power pack type HR080

Mini power pack type HR080

The type HR080 micro hydraulic power pack features high pressure in the smallest space, with the option to use any installation position. The reversing function is performed by reversing the direction of rotation of the motor. A directional valve is not needed. The motor is protected from overload by an integrated temperature switch. This hydraulic power pack is equipped with a DC or AC motor.

Technical data

  • Operating pressure: max 210 bar
  • Flow rate: max. 0.52 l/min
  • Tank capacity: 0,3 l
  • Weight: 4 kg

Data sheet: DH 6342

HR_S120_DH6343.rgb.100x100

Mini power pack type HR120

Mini power pack type HR120

The mini-hydraulic power pack type HR120 is characterized by high pressure in the smallest of spaces in any installation position. The reversing function is achieved by reversing the direction of rotation of the motor. No switching valve is necessary. Overload protection of the motor is guaranteed by an integrated temperature switch.

Technical data

  • Operating pressure: max. 210 bar
  • Flow rate: max. 0,52 l/min
  • Tank capacity: 0,7 l
  • Weight: 5,5 kg

Data sheet: DH 6343

Directional seated valves

Directional seated valves are leakage-free tight. Depending on the valve type, they are operated electromagnetically, pressure-operated, mechanically or manually. Seat valves and valve combinations are available. Directional spool valves also belong to the group of directional control valves. They control the direction of movement and speed of single and double-acting hydraulic consumers. Black and white directional spool valves, proportional directional spool valves and valve combinations are available.

SLC_S1_DH6033.rgb.100x100

Valve bank type SLC1

Valve bank (directional seated valve) type SLC1

The valve bank SLC1 is a combined design of seated valves and pilot operated check valves. This allows hydraulic actuators to be held in position for longer periods of time. Throttle check valves are mounted on the cylinders to adjust the speeds.

Technical data

  • Flow rate: max. 1 l/min
  • Operating pressure: max. 150 bar

Data sheet: DH 6033

TLC_S3_DH6020.cmyk.100x100

Valve bank type TLC3

Valve bank (spool valve) type TLC3

The valve bank type TLC3 is a combined design of spool valve and pilot operated check valve. Hydraulic actuators can thus be held in position for a longer period of time. Due to the integrated T-throttles it is also possible to preset the speed of the actuators.

Technical data

  • Flow rate: max. 3 l/min
  • Operating pressure: max. 250 bar

Data sheet: DH 6020

Please direct your enquiries about the above products to your sales partner.