Tuotetyypit

Load-holding valve type LHK

Product description

Load-holding valves are a type of pressure control valve. They prevent loads on cylinders or motors dropping in an uncontrolled manner. For this purpose they are pre-loaded with a pressure setting that is higher than the largest possible load. A hydraulic piston controls the opening of the valve to achieve the required lowering velocity.

The load-holding valve type LHK is suitable for applications that are not particularly prone to oscillations.

Shock valves and shuttle valves can be fitted with or without restrictor check valves, for example, to delay the release of hydraulic brakes.

Features and advantages:

Operating pressures up to 420 bar
Various adjustment options
Various configurations

Intended applications:

Cranes
Construction machinery
Lifting devices

Technical data - Type LHK - Over-center valve

Size2DesignPorting, Manifold mountingSystem pressure400Flow rate (lpm)20DocumentDownloadsConfiguratorConfigurator

Size3DesignAssembly kit, Screw-in type, Porting, Manifold mountingSystem pressure360Flow rate (lpm)60DocumentDownloadsConfiguratorConfigurator

Size4DesignAssembly kit, Porting, Manifold mountingSystem pressure350Flow rate (lpm)100DocumentDownloadsConfiguratorConfigurator

SizeDesignSystem pressureFlow rate (lpm)DocumentConfigurator2Porting, Manifold mounting40020DownloadsConfigurator3Assembly kit, Screw-in type, Porting, Manifold mounting36060DownloadsConfigurator4Assembly kit, Porting, Manifold mounting350100DownloadsConfigurator

HAWE maailmanlaajuisesti

HAWE Hydraulik -yhtiön toimipisteet ja myyjät ovat käytettävissäsi maailmanlaajuisesti.

Yhteyshenkilöt

Uutiset

Uutiset-alueelta löydät ajankohtaisia tietoja yrityksestä.

Kaikki lehdistötiedotteet

Sovellukset

HAWE Hydraulik osallistuu globaalien ongelmien ratkaisemiseen energian, infrastruktuurin, tehokkaan tuotannon, ravinnon & luonnon ja resurssien osalta.

Lisätietoja

Sivun alkuun