Press information

Displaying results 1 to 6 of 12 in total.


Digital amplifier EV2D – Ready for safety-relevant processes in the press brakes

A new digital valve amplifier has been developed for the valve-controlled press brake systems from HAWE Hydraulik, which is precisely tailored to the requirements. With SIL3, this meets the requirements for machine safety for press brakes.


Energy-efficient controls for press brakes - the right solution for every demands

Potential savings for energy and resources are also in great demand in press brakes. With the servo drive in both the valve and speed-controlled press controls, HAWE Hydraulik offers a wide product range that meet these requirements. At the same time, they also enable an increase in the speed of the pressing cycle and thus the overall productivity.


Easy to install pitch control in wind turbines

Pitch controls and pitch drives are used to reliably adjust the blade angle to the wind in wind turbines. These are also a guarantee for the best possible energy yield from wind power and must work reliably over the entire service life of the plant. Current development trends show a continuous increase in pitch activity. At the same time, the functionality of the drives has a considerable influence on the service life of other components such as the tower and foundation.


Plant-specific brake control for wind turbines from the modular system

In the event of an emergency or planned maintenance/service, the turning of the fast shaft of the gearbox in a wind turbine must be braked safely or kept safe after stopping. For this purpose, a disc brake is positioned on the shaft in medium and large wind turbines. This can be reliably triggered and operated by a hydraulic power pack with attached manifold. Depending on the size of the brakes, HAWE Hydraulik quickly and easily designs the right compact hydraulic power pack from the modular system.


Compact hydraulic control for blade tip brakes of wind turbines

For small and medium-sized wind turbines, the blade tip brake used must be compact. This sits at the end of the rotor blades and leads to the aerodynamic deceleration of the rotor by adjusting the blade tip. This brake can be hydraulically driven. With its specially tailored mini hydraulic unit, HAWE Hydraulik offers not only a very compact, but also a very robust solution. This reduces the maintenance effort and increases the reliability of the complete system.


Smart integrated solution with CAN bus combines boom and outrigger control in one block

HAWE Hydraulik has developed an integrated hydraulic solution for mobile machines in order to transfer the advantages of the CAN bus in the control of main functions to secondary functions. As a result, the machine manufacturer not only saves time during assembly, but also weight and installation space in the vehicle. This new manifold MICK is designed for use in the concrete pump. Particularly advantageous is its use in mobile machines with several consumer groups, which work sequentially and are operated separately from each other.